1961 1962 1963 1964 FULL SIZE PONTIAC BILLET STEEL FLYWHEEL TO 389 421 455 ENG

Description

1961  1962  1963  1964
FULL SIZE PONTIAC
"CONVERSION"
BILLET ALLOY STEEL FLYWHEEL
EXPLOSION PROOF   30 LB HIGH PERFORMANCE
REPLACEMENT FLYWHEEL
Use with late model  Pontiac  389,  400,  421,  428,  or 455
engines with 2.750" register flange on the crankshaft.  Use for stock restoration or racing applications.  Brand new ring gear, drilled for 10 1/2 " or 11" clutch.  This flywheel is identical to the stock factory flywheel in all dimensions including 2.750" diameter crankshaft register hole.  The only thing that is different from the original is the dual bolt pattern for your choice of pressure plate and clutch diameter.
All brand new (NOT REBUILT), USA made parts.
Why take a chance on a cast iron flywheel that is prone to cracking and sometimes blowing apart?  They are hard to find and expensive.  When you find one, then they still need to be turned, magna-fluxed and a new ring gear installed -- and you have usually exceeded the price of this brand new, high quality steel flywheel from Fabcraft Metalworks.
How many of you have run into dead ends or spent hours trying to shim starters or flywheels for this common but head- scratching conversion ?? ......
all Pontiac engines and flywheels are
NOT
the same !!!
...there are many differences... call Fabcraft Metalworks at 800-208-8242 for your specific application
These flywheels are custom machined, and
in addition to this
conversion flywheel
for use with your late model engine mated to the early car and bell housing,
are also available for the 1961 through 1964 full size Pontiacs running 1961-1964 engine blocks and bell housings.
Also available: clutch disc/plate, clutch pressure plate & bolts, throw out bearing, pilot bearing and all other transmission/clutch components. We also have new Super T-10 4 Speed, Muncie 4 Speed and Richmond 5 Speed Overdrive Transmissions.
Note:  You are only buying the flywheel, the other pictures are to show some of the other components available. Stock 1961 and 1962 G.M. cast iron bell housings will only accept 10 1/2" clutch and pressure plate.
See our e-bay store for other related components
.