66 69 PONTIAC OHC6 ALUMINUM ENGINE BOLT AND NUT KIT, WITHOUT POWER STEERING

Description

FOR 66 69 OHC6 WITHOUT POWER STEERING.  SPECIFY WITH WATER SPACER 66 67, OR NO WATER SPACER, 68 69.  DOES NOT INCLUDE 8 BELL HOUSING BOLTS AND 4, 1/2"  X 1 1/4" NC TRANS BOLTS...  THAT SET FOR STICK IS .00 . POWER STEERING IS ALSO PICTURED AND COULD USE SOME HELP FIGURING OUT IF IT IS CORRECT. I TOOK THE POWER STEERING OFF OF MY CAR SO I DO NOT HAVE ANYTHING TO GO BY. JUST AN OLD LIST AND IT SURE SHOWS A LOT OF 3/8" FLAT WASHERS.  iF YOU HAPPEN TO HAVE AN ENGINE TORN DOWN AND ALL THE POWERS TEERING BOLTS, EXCEPT FOR ALT TENSION BOLT NAD WASHER,,,THAT IS IN THE BASE KIT. TORQUE ON 5/16" BOLTS IS AT LEAST 15 POUNDS. TORQUE ON 3/8" BOLTS IS AT LEAST 20 POUNDS. TRANS BOLTS HELD FOR 10 YEARS AT 60 POUNDS ON MY BORG WARNER T5...NO LOCK WASHERS.       REMEMBER WHEN THIS KIT WAS .00? BET YOU WISH YOU HAD GOT ONE THEN. BASE KIT WEIGHS 1.4 POUNDS ON A BATHROOM SCALE, 605 GRAMS. STEEL BOLT KIT WEIGHS 3.6 POUNDS. THE BOLTS SUCK THE HEAT OUT OF THE ENGINE AND LOOK REALLY GOOD. i WILL BE ADDING SOMETHING ELSE TO THE SET AS SOON AS I GET IT READY AND WEIGHED.